FH Serie – CNC 5 Axis

Scope of supply

Standard accessories function table (please refer to the controller function for the electric control part)

1. Siemens 840DSL controller
2. Brand Own five-axis multi-function swing head
3. Electric spindle DGZX-24012/34B2-KFHWVJS
4. HSK-A100 40-tool magazine automatic tool change system
5. X/Y/Z hollow cooling ball screw drive
6. 7 roller linear slides (3 for X axis, 2 for Y/Z axis)—BOSCH REXROTH
7. X/Y/Z three-axis fully closed-loop optical ruler
8. Electrical box temperature control device
9. Spindle cooler
10. Spiral chip rolling device and rear iron chip conveyor iron chip car
11. Water from the center of the spindle, annular water spray
12. Blow air at the center of the spindle, and blow air in the ring.
13. The five-axis head crescent moon blows water, and the crescent moon blows air.
14. 1 type of safety interlock for front and side working doors
15. Spindle circulation cooling device.
16. Waterproof working fluorescent lamp
17. Hydraulic station device
18. Renishaw OMP60 Infrared Probe Unit
19. Renishaw Laser Tool Setter
20. Central centralized automatic feeding lubrication device
21. Operation side cleaning water gun and air interface
22. Cutting fluid cooling system
23. Fully enclosed protective sheet metal
24. Operation box
25. The electrical box is equipped with an air conditioner
26. Siemens electronic handwheel
27. Foot-operated spindle tool release switch
28. Foundation level pads and foundation bolts
29. Adjustment tools and toolboxes
30. Technical Manual

Design Features | Best Mechanical Wire Casting Analysis Design

• Full box type thermosymmetric casting structure, using Meehanna grade high-grade cast iron
• Tempering and natural aging treatment to eliminate internal stress
• Structural natural frequency vibration eliminates material processing stress
• Large-area high-rigidity column design with full wall, effectively improving rigidity and static and dynamic accuracy
• Three-axis hollow cooling screw drive
• CNC swing milling head (B axis)
• Built-in DD motor zero transmission chain no backlash design
• High acceleration characteristics
• The shortest span between the tool nose point of the spindle and the structural support point realizes the maximum rigidity of cutting
• Larger YRT bearings increase rigidity
• Equipped with HEIDENHAIN high-precision rotary encoder measurement system, fully closed-loop control to ensure the best accuracy
• Spindle and B-axis cooling system design to reduce heat transfer
• Rotary table (C axis)
• Built-in DD motor zero transmission chain no backlash design
• High acceleration and deceleration response characteristics
• Larger YRT bearings increase rigidity
• Large rated driving torque, positioning and processing with table positioning and clamping device
• Meet the two processing needs of milling and milling-turning, reduce workpiece handling and improve product accuracy
• Equipped with HEIDENHAIN high-precision rotary encoder measurement system, fully closed-loop control to ensure the best accuracy
• Cooling system design to reduce heat transfer
• Liftable tool setter
• Equipped with Ransishaw NC4F230 non-contact laser tool setter for higher precision
• Automatic tool setting on machine, automatic update of tool compensation
• The tool setting device can be raised and lowered to save the space of the processing surface
• Fully sealed sheet metal design protects the tool setter from water and iron filings during processing
• Infrared probe
• Equipped with Ransishaw OMP60 optical touch probe
• On-machine workpiece alignment and size inspection, reduce manual inspection errors, improve product accuracy and processing efficiency
• 90% savings in on-machine assistance time